A study was conducted on an industrial incinerator located at Kala Shah Kaku, Punjab, Pakistan to monitor and evaluate stack emissions (NOX, SOX, CO, VOCS) and determination of heavy metals in bottom and fly ash of an industrial incinerator burning tobacco dust. Incinerated bottom and fly ash samples were collected. For the purpose of ambient air monitoring three different sides of incinerator were selected. The air emissions monitoring included emissions from right side of the incinerator (A1), emissions from left side of the incinerator (A2) and emissions from the main gate of the incinerator (A3). To determine heavy metals in bottom and fly ash, HACH and Merck procedure via spectrophotometer were used. Respirable Dust Sampler and Flue Gas Analyzer were used to monitor ambient air quality and stack emissions respectively. The results of ambient quality (SOx, NOx, CO, CO2, PM& O2) revealed that the emissions from A2 were comparatively higher than emissions from A1 and A3. With the help of Flue Gas Analyzer it was found that carbon monoxide (CO) emissions were higher than SOX, NOX and VOCS. Bottom ash analysis by spectrophotometer showed that the heavy metals were below the detectable limits. The analysis conducted for heavy metals in fly ash by spectrometry as well confirmed that lead (Pb) and cadmium (Cd) were below the detectable limits and chromium was 1.96 mg/kg of the ash.
Published in | International Journal of Environmental Monitoring and Analysis (Volume 1, Issue 4) |
DOI | 10.11648/j.ijema.20130104.13 |
Page(s) | 128-132 |
Creative Commons |
This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited. |
Copyright |
Copyright © The Author(s), 2013. Published by Science Publishing Group |
Incineration, Tobacco, Ambient Air, Stack Emissions, Fly and Bottom Ash, Heavy Metals
[1] | O. Anubhav, C.B. Abhishek , S. Durgesh, "Solid waste management in developing countries through Plasma Arc Gasification," APCBEES Procedia, 1, pp 193-198, 2012. |
[2] | TT. Eighmy, J.J. Dykstra Eusden, J.E. Krzanowski, et al., "Comprehensive approach toward understanding element speciation and leaching behavior in municipal solid waste incineration electrostratic precipitator ash," J. Sci Total Environ., 29, pp. 629–646, 1995 . |
[3] | C. Ferreira, A. Ribeiro , L. Ottosen , "Possible applications for municipal solid waste fly ash," J. Hazard. Mater., 96, pp. 201–216, 2003. |
[4] | D.J. Lisk, "Environmental Implications of incineration of municipal solid waste and disposal," J. Sci Total Environ., 74, pp. 39-66 ,1988. |
[5] | C.C. Travis, H.A. Hatterner –Frey, "Human exposure to dioxin," J. Sci Total Environ., 104, pp. 97-127, 1991. |
[6] | P.A. Valberg, P.J. Drivas, S. McCarthy, A.Y Watson, "Evaluating the health impacts of incinerator emissions," J. Hazard. Mater., 47, pp. 205-227, 1996. |
[7] | S.J. Elliot, "A compartive analysis of public concern over solid waste incinerators," J. Waste Manage. Res., 16, pp. 351-364, 1998. |
[8] | G. Rice, J. Swartout, E. Brady Roberts, D. Reisman, K. Mahaffey, B. Layon, "Characterization of risks posed by combustor emissions," J. Drug Chem Toxicol., 22, pp. 221-240, 1999. |
[9] | J.M. Chimenos, M. Segarra, M.A. Fernandez, et al., "Characterization of the bottom ash in municipal solid waste incinerator," J. Hazard. Mater., 64, pp. 211–222, 1999 |
[10] | R. Klein, T. Baumann, E. Kahapka, et al., "Temperature development in a modern municipal solid waste incineration (MSWI) bottom ash landfill with regard to sustainable waste management," J. Hazard. Mater., 83, pp. 265–280 , 2001. |
[11] | S.E. Sawell, A.J. Chandler, T.T. Eighmy, et al., "An international perspective on the characterisation and management of residues from MSW incinerators," J. Biomass Bioenergy, 9,pp. 377–386, 1995. |
[12] | H.A. Van der Sloot, D.S. Kosson, Hjelmar, "Characteristics, treatment and utilization of residues from municipal waste incineration," J. Waste Manage., 21, pp. 753–765, 2001 |
[13] | S. Gau, W. Jeng, "Influence of ligands on metals leachability from landfilling bottom ashes," J. Hazard. Mater., 58, pp. 59–71,1998. |
[14] | C.H. Jung, T. Matsuto, N. Tanaka, et al., "Metal distribution in incineration residues of municipal solid waste (MSW) in Japan, " J. Waste Manage., 24, pp. 381–391, 2004. |
[15] | E.E. Chang , P.C. Chiang, P.H. Lu, et al., "Comparisons of metal leachability for various wastes by extraction and leaching methods, " Chemosphere, 45, pp. 91–99, 2001. |
[16] | V. Bruder-Hubscher, F. Lagarde, M.J.F Leroy,-et al., "Application of a sequential extraction procedure to study the release of elements from municipal solid waste incineration bottom ash, " J. Anal Chim Acta , 451, pp. 285–295 |
[17] | C.M. Radetski, B. Ferrari, S. Cotelle, et al., "Evaluation of the genotoxic, mutagenic and oxidant stress potentials of municipal solid waste incinerator bottom ash leachates," J. Sci Total Environ., 333, pp. 209– 216, 2004. |
[18] | K.W. Schramm, A. Hofmaier, O. Klobasa, et al., "Biological in vitro emission control," J. Anal. Appl. Pyro., 49, pp. 199–210,1999 |
[19] | GEL.www.gel.com.pk/waste.html. Accessed on November 10 2012 |
[20] | http://www.cropwat.agrif.bg.ac.rs/content/files/laboratory%20manual%20-%20Photometric%20methods%20for%20determination%20of%20chemical%20contaminants%20in%20water.pdf. Accessed on December 17, 2012 |
[21] | https://www.google.com.pk/url?sa=t&rct=j&q=&esrc=s&source=web&cd=2&cad=rja&ved=0CDAQFjAB&url=http%3A%2F%2Fwww.hach.com%2Fasset-get.download.jsa%3Fid%3D7639983705&ei=xQQFUpyxAtLh4AOHoIGQBQ&usg=AFQjCNGNnxXYwa8bMz2HX4X0IeM08LJTOA&bvm=bv.50500085,d.dmg. Accessed on December 17, 2012 |
[22] | http://www.broward.org/POLLUTIONPREVENTION/AIRQUALITY/Pages/CriteriaAirPollutants.aspx. Accessed on December 20, 2012 |
[23] | http://www.hcdoes.org/airquality/monitoring/pm.htm. Accessed on January 15, 2013. |
APA Style
Sana Akhtar, Sunaina Ashfaq, Asim Mehmood, Saamia Saif, Almas Hamid. (2013). Gaseous Emissions Monitoring and Ash Analysis of an Industrial Incinerator in Pakistan. International Journal of Environmental Monitoring and Analysis, 1(4), 128-132. https://doi.org/10.11648/j.ijema.20130104.13
ACS Style
Sana Akhtar; Sunaina Ashfaq; Asim Mehmood; Saamia Saif; Almas Hamid. Gaseous Emissions Monitoring and Ash Analysis of an Industrial Incinerator in Pakistan. Int. J. Environ. Monit. Anal. 2013, 1(4), 128-132. doi: 10.11648/j.ijema.20130104.13
AMA Style
Sana Akhtar, Sunaina Ashfaq, Asim Mehmood, Saamia Saif, Almas Hamid. Gaseous Emissions Monitoring and Ash Analysis of an Industrial Incinerator in Pakistan. Int J Environ Monit Anal. 2013;1(4):128-132. doi: 10.11648/j.ijema.20130104.13
@article{10.11648/j.ijema.20130104.13, author = {Sana Akhtar and Sunaina Ashfaq and Asim Mehmood and Saamia Saif and Almas Hamid}, title = {Gaseous Emissions Monitoring and Ash Analysis of an Industrial Incinerator in Pakistan}, journal = {International Journal of Environmental Monitoring and Analysis}, volume = {1}, number = {4}, pages = {128-132}, doi = {10.11648/j.ijema.20130104.13}, url = {https://doi.org/10.11648/j.ijema.20130104.13}, eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ijema.20130104.13}, abstract = {A study was conducted on an industrial incinerator located at Kala Shah Kaku, Punjab, Pakistan to monitor and evaluate stack emissions (NOX, SOX, CO, VOCS) and determination of heavy metals in bottom and fly ash of an industrial incinerator burning tobacco dust. Incinerated bottom and fly ash samples were collected. For the purpose of ambient air monitoring three different sides of incinerator were selected. The air emissions monitoring included emissions from right side of the incinerator (A1), emissions from left side of the incinerator (A2) and emissions from the main gate of the incinerator (A3). To determine heavy metals in bottom and fly ash, HACH and Merck procedure via spectrophotometer were used. Respirable Dust Sampler and Flue Gas Analyzer were used to monitor ambient air quality and stack emissions respectively. The results of ambient quality (SOx, NOx, CO, CO2, PM& O2) revealed that the emissions from A2 were comparatively higher than emissions from A1 and A3. With the help of Flue Gas Analyzer it was found that carbon monoxide (CO) emissions were higher than SOX, NOX and VOCS. Bottom ash analysis by spectrophotometer showed that the heavy metals were below the detectable limits. The analysis conducted for heavy metals in fly ash by spectrometry as well confirmed that lead (Pb) and cadmium (Cd) were below the detectable limits and chromium was 1.96 mg/kg of the ash.}, year = {2013} }
TY - JOUR T1 - Gaseous Emissions Monitoring and Ash Analysis of an Industrial Incinerator in Pakistan AU - Sana Akhtar AU - Sunaina Ashfaq AU - Asim Mehmood AU - Saamia Saif AU - Almas Hamid Y1 - 2013/08/20 PY - 2013 N1 - https://doi.org/10.11648/j.ijema.20130104.13 DO - 10.11648/j.ijema.20130104.13 T2 - International Journal of Environmental Monitoring and Analysis JF - International Journal of Environmental Monitoring and Analysis JO - International Journal of Environmental Monitoring and Analysis SP - 128 EP - 132 PB - Science Publishing Group SN - 2328-7667 UR - https://doi.org/10.11648/j.ijema.20130104.13 AB - A study was conducted on an industrial incinerator located at Kala Shah Kaku, Punjab, Pakistan to monitor and evaluate stack emissions (NOX, SOX, CO, VOCS) and determination of heavy metals in bottom and fly ash of an industrial incinerator burning tobacco dust. Incinerated bottom and fly ash samples were collected. For the purpose of ambient air monitoring three different sides of incinerator were selected. The air emissions monitoring included emissions from right side of the incinerator (A1), emissions from left side of the incinerator (A2) and emissions from the main gate of the incinerator (A3). To determine heavy metals in bottom and fly ash, HACH and Merck procedure via spectrophotometer were used. Respirable Dust Sampler and Flue Gas Analyzer were used to monitor ambient air quality and stack emissions respectively. The results of ambient quality (SOx, NOx, CO, CO2, PM& O2) revealed that the emissions from A2 were comparatively higher than emissions from A1 and A3. With the help of Flue Gas Analyzer it was found that carbon monoxide (CO) emissions were higher than SOX, NOX and VOCS. Bottom ash analysis by spectrophotometer showed that the heavy metals were below the detectable limits. The analysis conducted for heavy metals in fly ash by spectrometry as well confirmed that lead (Pb) and cadmium (Cd) were below the detectable limits and chromium was 1.96 mg/kg of the ash. VL - 1 IS - 4 ER -